RD982

Repeaters & Systems | DMR

Highlights

diagram indicating highlights of RD982

Comprehensive Network

All the repeaters from Hytera can be connected in digital mode via IP connection for multi-site requirements. Both in conventional analogue and DMR modes (DMR Tier II), the RD982S repeater can be used with the RD622 and RD962 repeaters to create an impressive network

Flexible Installation

The RD982 can be installed in a 19-inch equipment rack or a work table

Maximise Capacity

Thanks to the TDMA technology, twice as many users can use the same channel. With frequency scarcity, this represents an important relief and reduces the expense of system terminals and licenses

Professional Design

Integrated LEDs complement the sleek repeater design, while the integrated fan assembly provides high cooling capacity. Created with an intuitive interface, clear menus and the large navigation controller ensure it's simple to use

Secure Communication

Offering advanced digital encryption function, the RD982 can switch independently between digital and analogue modes, yet always ensuring the signal is protected

Functions

Created with Sketch. Mixed Mode Operation

This feature allows the device to automatically detect and switch between analogue and digital modes based on the signal received.

Created with Sketch. IP Site Connect

Create and control your network using IP (internet protocol) site connect.

Created with Sketch. Digital Encryption

40 bit enhanced encryption as standard with the latest firmware, ensuring your transmissions are secure.

Created with Sketch. Pseudo Trunking

Using pseudo-trunking, a Hytera patented technology, slots can be shared to improve capacity usage with transmissions either direct to handset or to repeater.

Hytera Rd985 01 Front

Created with Sketch. Wall Mounting

Simple, flexible installation utilising the specially designed wall mounting bracket.

Created with Sketch. Accessory Connector

Port to connect a multitude of audio accessory options, improving the user operating experience in different environments.

Accessories for RD982

Included as standard with RD982 Included as standard with RD982

Systems that work with RD982

Technical Specifications

General

Frequency Range
VHF: 136-174MHz UHF1: 400-470MHz UHF2: 450-520MHz
Channel Capacity
16
Digital Protocol
ETSI-TS102 361-1,2 & 3
Supply Voltage
DC +13.6v ± 15%
Battery Backup
YES via PSU
Integral Battery Charging
YES via PSU
Dimensions(W×H×D)
88 x 483 x 366 (mm)
Weight
8.5Kg
Display
2.0'' 4 rows 160*128 pixels 262200 colours
Programmable Buttons
4
TX Aerial Connector
N-type socket
RX Aerial Connector
N-type socket
Internal Duplexer
YES using optional mounting kit

Environmental Specifications

Dust & Water Intrusion
IP54 Standard

Features

19" Rack Mounting
YES (2U required)
Back Pack
NO
Multiple CTCSS/ CDCSS
YES
Repeater Knockdown
YES (Analogue & Digital)
IP Ports
1
GPS
NO
Telemetry
YES
Audio Output for Slot A & B
YES
Remote Programming
YES via IP interface
Remote Diagnostic & Control
Software available
Emergency Mode
NO
Lone Worker
NO
Mandown
NO
Priority Scan
YES
Digital Encryption
Advanced encryption (Hytera or DMRA 128 bits and 256bits AES) available via chargeable licence file.
Multiple Key Encryption Decode
YES
Multilanguage Menu
YES
Power on & off user logo programming
YES
Voice Interrupt
Yes (latest firmware required and Smart Dispatch V4.5.6)
Text Messaging
Yes via application software
Quick Text Messages
Up to 25 pre-programmed via CPS (for telemetry use)
MPT1327 / 1343 Trunking
NO
Tier 3 Trunking
NO
Single Site XPT
NO
Multi-Site XPT
NO
Number of Sites
NO
Over-the-Air Programming
NO
Analogue Only Version
Not Available